国产日产精品一区二区三区四区_欧美色欧美亚洲另类七区_国产区免费在线观看_日韩在线播_欧美日韩在线一区_97爱爱爱

產品列表PRODUCTS LIST

聯系信息

  • 電話:
    189-2580-2250
  • 傳真:
    18925802250
  • 服務熱線:
    0769-82205353
首頁 > 技術與支持 > ASTM D4434
ASTM D4434
點擊次數:1044 更新時間:2019-08-13

ASTM D4434

本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用,為確保測試結果的準確性、節省您的時間,如需ASTM D4434標準詳細信息或ASTM D4434具體測試方法,可與我們技術人員聯系或給我們留言,我們將為您提供相關的技術支持。


聚氯乙烯屋面薄板的標準規范:

本規范規定了擬用于單層屋頂薄膜的、用聚氯乙烯樹脂作為初級聚合物而制造的柔性薄板空氣暴露測試程序。

kingjo氙燈試驗箱ASTM D4434測試方法

 

ASTM D4434測試方法

 

ASTM D4434英文簡介

This specification covers flexible fiber- or fabric-reinforced sheet made from poly(vinyl chloride) resin as the primary polymer intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain. In-place roof system design criteria such as fire resistance, material compatibility, wind uplift resistance, in-situ shrinkage, among others, are beyond the scope of this specification. The physical requirements for which the sheet materials shall be tested on and shall conform accordingly to are as follows: overall thickness and thickness over scrim; tensile strength at break; breaking strength; elongation at break; seam strength; retention of properties after heat aging; tear resistance and tearing strength; low temperature bend; cracking and crazing after accelerated weathering test; linear dimensional change; change in weight after immersion in water; and static and dynamic puncture resistance.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers flexible sheet made from poly(vinyl chloride) resin as the primary polymer intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fibers or reinforcing fabrics.

1.2 The tests and property limits used to characterize the sheet are values intended to ensure minimum quality for the intended purpose. In-place roof system design criteria, such as fire resistance, material compatibility, wind uplift resistance, in-situ shrinkage, among others, are factors that must be considered but are beyond the scope of this specification.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards

D570 Test Method for Water Absorption of Plastics

D638 Test Method for Tensile Properties of Plastics

D751 Test Methods for Coated Fabrics

D1004 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1204 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D2136 Test Method for Coated Fabrics--Low-Temperature Bend Test

D3045 Practice for Heat Aging of Plastics Without Load

D5602 Test Method for Static Puncture Resistance of Roofing Membrane Specimens

D5635 Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

D7635/D7635M Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that se Laboratory Light Sources

G154 Practice for Operating Fluorescent Light Apparatus for V Exposure of Nonmetallic Materials

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

聯系人
在線客服
用心服務 成就你我

粵公網安備44190002001386號

主站蜘蛛池模板: 国产网站免费在线观看 | 亚洲欧美综合 | 欧美中出| 国产精品成人第一区 | 第一页亚洲 | 日本免费一二三区 | 国产成人亚洲综合一区 | 久青草国产视频 | 伊人操| 国产淫视 | 国产亚洲欧美精品久久久 | 欧洲日韩视频二区在线 | 亚洲视频一区二区三区 | 国产一区二三区 | 亚洲一级二级三级 | 欧美性xxxxxx性 | 国产精品免费网站 | 精品久久久久久久一区二区手机版 | 亚洲页码| 精品在线一区二区 | 亚洲国产欧美自拍 | 亚欧成人毛片一区二区三区四区 | 国产91在线视频 | 99久久久国产精品免费 | 国产在线精品一区二区三区不卡 | 国产精品免费大片一区二区 | 欧美成人国产 | 亚洲精品美女久久久aaa | 日韩欧美一区二区三区在线视频 | 亚洲 欧美 国产另类首页 | 国产欧美亚洲精品a | 欧美亚洲综合图区在线 | 国产欧美日韩精品在钱 | 精品国产一区二区三区久久影院 | 国产精品免费看 | 亚洲视频在线免费看 | 日韩一区二区久久久久久 | 97毛片| 综合精品欧美日韩国产在线 | 亚洲第一区视频在线观看 | 国产精品免费视频播放 |